Dediprog SF600 Plus
Fast SPI Flash IC Programmer
High-Speed ISP Programmer
The SF600Plus is an upgraded version of SF600. The main difference is that SF600Plus embeds a 8GB memory which allows standalone programming.
SF600Plus is high speed "in System Programming" programmer to update the SPI Flash soldered on board (In Circuit Programming) or in the socket adaptor (Off line programming). The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.
SF600Plus combines the advantages of SF100 with additional improvements:- High speed USB - Higher SPI performances - Support Single, Dual and Quad IO (ISP mode only).
SF600Plus is an upgrade version of SF600. The main difference is that SF600Plus embeds a 8GB memory which allows standalone programming.
- USB High speed and high SPI performance, support up to 2Gb SPI Flash
- In circuit Programming: Program on board SPI Flash
- Off line Programming: Program SPI Flash direct on the socket
- Start button feature: Make Batch function in USB mode
- Standalone mode: Embedded 8GB memory. Program without any computer
- Support Single, Dual and Quad IO serial communication
- Program two Serial Flash memories
- Signal conflict protections
- Multi-Programmers Capability through USB
- Support 1.8V low voltage IC
- Support Windows 2003 and above
- Support both 32 and 64 bit OS
The SF600Plus USB software tool chain offers high flexibility and fit the different and highest requirements:
Engineering Graphic User Interface
For engineers and expert to access advanced features for development, repairing etc.
Production Graphic User Interface
For operators in production to control multiple programmers and improve the throughput.
Command line interface
Customer software can control the multi SF600Plus programmers.
SF600Plus is designed with ISP header, through an appropriate connector, users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF600Plus 2x10 header pin out. DediProg also provides the SF600Plus ISP Cable which is used to connect the programmer to the 2X6 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF600Plus ISP Cable 2x6 pin out.
Hardware Requirement for ISP
To have a clear understanding on the different ISP or backup boot methods and different reference schematics, please download our dedicated application notes above.
In the box
- 1 x SF600Plus Programmer
- 1 x USB Cable
- 1 x AC Power Adaptor
- 1 x ISP Cable (ISP-600-CB1-G)
- 1 x SF100 2.54mm 2*4 ISP Cable (ISP1-CB)
- 1 x SF600 Universal Adaptor (ADP-SF600-TO-SF100)
- 1 x CD-ROM (Included Software, specifications and user manual)