Dediprog SF100
Flash ISP Device Programmer

  • Devices: Flash
  • Interface: USB 2.0
  • OS: Win
  • Protocol: SPI

Update your Flash Directly on Board

The SF-100 is a high speed "In System Programmer" to update the SPI Flash soldered on board or Freescale MCU using Ezport. The programmer is easily controlled by the computer DediProg Software through the USB bus offering friendly interface and powerful features to users.

What's included

  • 1x USB cable
  • 1x SF100 Programmer
  • 1x ISP cable
  • 1x SF100 Universal Adapter
  • CDROM with Software, specifications and user manual

Dediprog SF100
Flash ISP Device Programmer

  • Devices: Flash
  • Interface: USB 2.0
  • OS: Win
  • Protocol: SPI

art : SF100
€ 270 excl. VAT
€ 338 incl. VAT

My AutoQuote | Easy & Fast

Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.

More information

Specifications

User interfaceEngineering GUI, Production GUI, Command line
USB Power supplyVdd = 5V ± 5%, Idd min = 500mA
Icc max supplie50mA
OSWindows
Hard disk with at least64 MB free space
PC connectionUSB 2.0/1.1 port

Product information

Features
  • USB Interface
  • Start button feature
  • Signal conflict protections
  • Update Serial Flash soldered on board with application powered or not
  • Control Application, controller reset and MOSFET isolation status
  • Update the internal Flash of Freescale MCU using the Ezport (MCF5223,MCF5221,MCF5213) or the external SPI Flash of Freescale MCU using the SBF interface (MCF5445, MCF5227)
  • Capable of handling two serial flash memories (new feature; provided in SF100 with serial number DP001325, firmware 2.0.4, software 2.0.37 and after)
  • Multi-Programmers Capability
  • Support Windows
  • Support both 32 bit or 64 bit OS
Engineering Graphic User InterfaceFor engineers and expert to access advanced features for development and repairing etc.
Production Graphic User InterfaceFor operators in production to control multiple programmers and improve the throughput.
Command line interfaceCustomer software can control multi SF100 programmers (SF100 integration, Control SF100 with Production In Circuit Tester).
HardwareSF100 is designed with ISP header, through an appropriate connector; users can connect the programmer and drive the SPI signals, supply the memory and control the controller or application status. Please refer to Table 1 for the SF100 2x7 header pin out. DediProg also provides the SF100 ISP Cable which is used to connect the SF100 programmer to the 2X4 2.54mm ISP Pin Header on board, please refer to Table 2 for the SF100 ISP Cable 2x4 pin out.

Recently viewed