SD3.0 Trig | Protocol + Logic Analyzer
2-in-1 Protocol + Logic Analyzer 2GHz
Powerful PC-based with 34 channels, 8Gb memory portable protocol and logic analyzer. I2C, SPI, UART, SD 3.0 trigger and eMMC5.0, CAN and eSPI protocol monitor among many others are included. Only 123 x 76 x 21mm in size!
- USB3.0 interface
- 34 Channels
- 2GHz timing / 200MHz state analysis
- 8Gb Memory
- Voltage detect : 2 sets
- Stacks with Acute or another DSO to form as an MSO
The TravelLogic TL3234B+ is small enough to fit into your pocket, yet truly sophisticated logic analyzer, capable of 2 GHz timing analysis, or 200 MHz state analysis, with 8 Gb total stackable memory. With USB 3.0 connection, no additional power supply is needed.
Use the TravelLogic to capture many complex signals for circuit debugging. TravelLogic is also a good learning tool that assists students in understanding digital timing sequence relationships. Test reports and captured waveforms are easily saved for post capture analysis. You can save to a text or BMP file for further analysis.
- SVID *
- *) Upon request Only by users who have signed CNDA with Intel, supported by TL3234B+ ONLY
1-Wire, 3-Wire, 7-Segment, A/D Mux Flash, AccMeter, ADC, APML, BiSS-C, BSD, CAN 2.0, Close Caption, DALI, DMX512, DP Aux, EDID, eMMC 5.1/MMC, eSPI, FlexRay, HDMI CEC, HD Audio, HDLC, HDQ, HID over I²C, I²C, I²C EEPROM, I²S, I³C, I80, IDE, ITU656, IrDA, JTAG, LCD1602, LIN2.2, Line Encoding, Line decoding, Lissajous, LPC, LPT, M-Bus, Math, MDIO, MHL CBUS, Microwire, MII, MIPI DSI, MIPI RFFE, MIPI SPMI 2.0, Modbus, NAND Flash, NEC IR, PECI, PMBus, Profibus, PS/2, PWM, QI, RGB Interface, RC-5, RC-6, SD3.0 (SDIO), Serial Flash, Serial IRQ, SGPIO, Smart Card, SMBus, SMI, S/PDIF, SPI, SPI-NAND, SSI, ST7669, SWD, SWP, SVI2, SVID**, UART, UNI/O, USB 1.1, USB PD 3.0, Wiegand, ... **) Upon request Only by users who have signed CNDA with Intel, supported by all TL3000 models.
|Power Source||USB bus-power (+5V)|
|Static Power Consumption||0.75W|
|Max Power Consumption||<2.5W|
|Hardware Interface||USB3.0 (USB2.0 compatible|
|Timing Analysis (Asynchronous, Max. Sample Rate)||2GHz|
|State Clock Rate (Synchronous, External Clock)||200MHz|
|Storage||Conventional Timing, Transitional Timing|
|Channels (Data / Clock / Analog / Ground)||32 / 2 / 2 / 4|
|See datasheet for more specifications|
In the box
- TL3234B+ Logic Analyzer
- Zippered Carrying Case
- USB 3.0 Cable
- Lead Cable 8cm - teflon insulated 40-lead (36 signal + 4 ground)
- 40 x Grippers (each with dual male Berg pins)
- Stack Cable (mini-coax)