Logic Analyzer | Protocol
16 Ch, 75MHz + 30 Protocols Analyzer
The LAP-C16064 USB Logic Analyzer features powerful protocol analyzer capabilities (expandable with plugins), 16 channels, 1Mbit RAM, 64Kbit memory depth per channel, 16Mbit data compression, 75MHz bandwidth, 100Hz-100MHz sample rate, and programmable trigger.
Included protocol decodes
- 7-SEGMENT LED
- ARITHMETIC LOGIC
- CAN 2.0B
- DIGITAL LOGIC
- I2C (EEPROM 24LCS61/24LCS62)
- I2C (Serial EEPROM 24L Series)
- I2C+Timing New Function
- JTAG 2.0
- SPI compatible (Atmel Memory)
Protocol Analyzer Modules
The Zeroplus LAP-C PC-based logic analyzers series feature powerful protocol analyzer capabilities. Each Logic Analyzer is shipped with 23 or more protocol analyzer plugins (depending on the model). More than 100 additional plugins are available and the list is growing.
Multi-Stacked Logic Analyzer
In order to extend Channels and Memory, it is possible to link up to 4 LAP-C together (function supported only by LAP-C162000, 32128, 321000, 322000).
The LAP-C series has been designed to work with an oscilloscope to enable both analog and digital signals to be captured.
User defined trigger condition and setting mode in both serial/parallel signal, and trigger delay functions.
Extending Channel Capture
Two or more LAP-C logic analyzers can be linked to increase both capture memory and the number of channels.
The Zeroplus patented waveform compression technology increases the effective sample memory capacity far beyond the physical memory. All channels can achieve a compression rate up to 255× depending on the data content, allowing you to obtain considerably more sampling data.
Captured data may be filtered to save on capture memory, storing only needed data.
The LAP-C series feature a button to start sampling, and connects to a PC via USB. It supports the full 480Mbps USB 2.0 speed (USB 1.1 compatible) and is powered from the USB as well. The software is compatible with all Windows versions.
|Internal Clock (Timing Mode)||100Hz~200MHz|
|External Clock (State Mode)||100MHz|
|Depth(Per Channel)||64Kbits (Max 16Mbits for compression)|
|Trigger Channel||16 CH|
|Trigger Level||1 Level|
|Data Compression||Max 16Mbits|
|Infinite Increase Spacer Bar||Yes|
|Automatic Zoom In of Spacer Bar||Yes|
|Automatic Software Upgrade||Yes|
|Data Range Selectable||Yes|
|Bus Inquiry and Counter||Yes|
|Protocol Analyzer Plug-In||Yes|
|Protocol Packet List||Yes|
|Power||USB (DC 5V, 500mA)|
|Phase Errors||< 1.5ns|
|Maximum Input Voltage||±30V|
|Impedance||500K Ohm /10pF|
|Safety Certification||FCC / CE / WEEE / RoHS|
In the box
- 1x LAP-C16064 (main unit)
- 2x 8-channel signal cable
- 1x 2-channel signal cable
- 1x 1-channel signal cable
- 20x Test hook grips in different colors
- 1x USB cable
- 1x Carry case
- 1x Printed manual
- 1x CD with software, drivers, and documentation