Oscium WiPry-Pro Combo
Spectrum and Power Analyzer
Scan & Fehlerbehebung WiFi 2,4 GHz
Die Visualisierung Ihrer drahtlosen Umgebung ist jetzt auf Ihrem iPhone, iPad oder iPod möglich. Dieses Tool ist perfekt für den RF-Enthusiasten. Die Kombination eines Spektrum-Analysators und eines Leistungsmessers in einem Werkzeug.
- 2.4 GHz Spectrum Analyzer
- Scan & troubleshoot WiFi
- 100 MHz to 2.7 GHz Power Meter
- Measure Pulse Width, Duty Cycle
- View Transmit On & Off Times
Pry Into Wireless Environment
The 2.4 GHz band is a busy place. Your wireless internet operates in this range as well as other electronic devices such as baby monitors, cordless phones, garage door openers, and microwave ovens. Since WiFi can extend the length of a football field, nearby buildings or residences can also cause interference. With WiPry, you can pinpoint the source of your noise.
Detect & Avoid Noisy ChannelsAll activity across the 2.4 GHz spectrum is visible with WiPry-Pro. Measurement settings include 802.11b, 802.11g, 802.11n and 802.15.4 (ZigBee). SSID-specific activity is also available. Oscium is the only manufacturer to make this available to customers through the Apple App Store. Data is gathered externally and in full compliance with Apple's Made for iPod program. Visualize your network like never before - on your favorite iOS device! It's possible to view data in real time or over time using waterfall mode.
Troubleshoot 2.4 GHz On-The-Go
Visualize your wireless environment by plugging the WiPry-Pro accessory into your iPhone, iPad or iPod. WiPry-Pro gives you everything you need to eliminate unnecessary interference, and it's small enough to fit in your pocket. WiPry-Pro is the perfect on-the-go troubleshooting tool for IT professionals and wireless network technicians.
Best Value & Most Innovative
According to industry analyst Mariano Kimbara (Frost & Sullivan), Oscium's WiPry family of products is the most innovative solution available and the best value.
Combo Adds Power MeterUpgrade to WiPry-Pro Combo for timing and power measurements. Unlock transmission details like never before. Directly connect to your RF source using our conducted measurement kit and view transmit on & off times, pulse width and duty cycle. The power meter side of WiPry-Combo is a must-have for the RF enthusiast. For more information on how to get the most out of this powerful tool, see it in action on Oscium's blog or visit the FAQ.
Native Lightning ConnectorWiPry-Pro Combo is equipped with a native Lightning connector. It is made for the following Apple products: iPhone 5C, iPhone 5S, iPhone 5, iPad mini, iPad Air, iPad 4, iPod touch [5th generation].
|Spectrum Analyzer Mode|
|Display||9.7” (iPad) 7.9” (iPad mini) 4.0” or 3.5” (iPhone, iPod)|
|Resolution||2048x1536 (iPad, iPad mini retina), 1024x768 (iPad mini), 136x640 (iPod, iPhone)|
|Spectrum Scan||2.4 to 2.495 GHz|
|Amplitude Range||-100 to -5 dBm|
|Amplitude Resolution||0.5 dBm|
|Resolution Bandwidth||400 KHz|
|Antenna||2.4-2.5 GHz 0 dBi|
|Frequency Range||2.4-2.5 GHz|
|Amplitude Range||-100 to +10 dBm|
|Amplitude Resolution||1 dBm|
|Antenna||Internal 0 dBi|
|Initial SSID Scan||2 minutes|
|SSID Scan Rate (after initial scan)||20 seconds|
|Power Meter Mode|
|Frequency Range||100 MHz to 2.7 GHz|
|Sample Rate||up to 50 MSPS|
|Amplitude Range||-45 to 0 dBm|
|Amplitude Resolution||0.2 dBm|
|Timescales||1s to 2us|
|Antenna Port||SMB (shared with spectrum)|
In dem Paket
- WiPry-Pro Combo