ASSET Boundary Scan PCIe-410 Controller Kit
PCIe-410 Controller Kit
The PCIe-410 hardware kit is a high throughput, flexible boundary-scan test (BST)/JTAG controller for the ScanWorks® platform for embedded instruments. The PCIe-410 is intended for high-volume manufacturing environments and multi-TAP (test access port) UUTs (unit under test).
The PCIe-410 is intended for high-volume manufacturing environments and multi-TAP (test access port) UUTs (unit under test). It applies the test and programming operations created with the ScanWorks BST tool, supporting structural tests such as shorts and opens testing, scan path verification, interconnect tests and memory access tests.
With its high-speed test clock (TCK) and parallel programming option, it is also highly recommended for in-system programming.
The PCIe-410 hardware kit comes with a four-port, low-voltage boundary-scan interface pod for connecting to the UUT. The pod can be up to 50 feet from the controller card and still support boundary scan’s maximum TCK frequency of 50 MHz. ScanWorks supports up to three PCIe-410 controller cards in one personal computer (PC). Each controller card supports one pod for a total of 12 test ports in a maximum configuration.
In addition, the PCIe-410 can handle multiple scan paths through software as well as the concatenation of scan paths. For controlling and monitoring non-boundary-scan signals, the PCIe-410 has 20 discrete I/O (DIO) signals that can be manipulated individually.
|Max throughput/port||50Mbps (Mb/second)|
|Number of TAP(s)||4|
|TAP control mode(s)||1|
|Distance controller to board||10 Ft|
|Distance controller to board with pod||13 Ft|
|Maximum distance||50 Ft|
|Voltage||0.8V - 3.3V (5.0V compatible)|
|TCK Signal||160kHz - 50MHz|
In the box
- 1x PCIe Controller Card (Full or low-profile bracket)<br>
- 1x Four-Port Low-Voltage Pod<br>
- 1x Controller Cable<br>
- 4x Pod-to-UUT Cables<br>
- 1x Power Cable<br>
- 4x Four Adapters<br>