Dediprog Backup Boot Flash Module-SO8W
207mil socket

Backup Boot Flash Socket

The Backup Boot Flash is an ingenious tool created by Dediprog to force the application controller to work automatically on the backup SPI Flash inserted in our tool SO8W socket and no more on the Main Serial Flash soldered on board. At the connection on board, the BBF tool will disable automatically the Main Serial Flash that does not need to be unsoldered.

What's included

  • 1 x Backup Boot Flash module with SO8W socket(BBF-8W)
  • 1 x BBF cable with 2.54mm pitch 2x5 female header
  • 1 x SO8 Connection Adapter for BBF
  • 1 x 1.27mm 2x4 cable with female header
  • 2 x 1.27mm 2x4 SMT male header

Dediprog Backup Boot Flash Module-SO8W
207mil socket


art : BBF-8W
€ 129 excl. VAT
€ 161 incl. VAT

My AutoQuote | Easy & Fast

Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.

More information

Product information

Can be connected to the application with:
  • The BBF cable (included) to the application 2X5 2.54mm pin header.
  • The BBF cable (included) to our SMT 1.27mm Pin Header (included) soldered in place of the Main Serial flash footprint for a better stability.
  • The SO8 Test Clip (to be purchased separately) to be connected on the Main Serial flash package soldered on board (no need of connector).

The Serial Flash can be easily changed manually thanks to the SO8W socket or even updated by connecting our SF100 programmer. The SF100 programmer is completely transparent for the application and will offer to developer high flexibility for code trials or update. The BBF is frequently used to boot failing computers and use the Flash Utility tools to update the corrupted Bios memory.

Please note the BBF modules does not support 1.8V low voltage IC.
Features
  • Compatible with most of the applications (no hardware modification needed)
  • Disable automatically the two Main Serial Flash soldered on board (No need to unsolder it)
  • Main Serial Flash can be enabled again with a switch on the BBF tool
  • Backup Serial Flash can be easily updated by connecting the SF100 programmer

Recently viewed