Cuncurrent Production Programmer
Universal Gang 4 Programmer
LP-456 is ultra-speedy universal 4x48 pin-drive concurrent production programmer. You can just use the general type adapters on the market for efficient multiprogramming solution.
- Four independent universal programming pin-driver in one unit.
- Provides with DUT 75MHz bandwidth and < ±2.5nS signal skew. In addition to the high processing speed, you can verify whether the devices working frequency meet their specifications.
- Provides Hands-free Operation. The asynchronous and concurrent operation allows a chip to begin programming immediately upon insertion of chip. The operator just take off the finished device and inserts a new device.
- Provides mass-production-oriented software. There is used a Project file to control LP-456 to minimize the operator error. Moreover, it provides programming history and yield statistic for needs of production managements.
- Provides insertion test and contact check before programming.
- General type adapter can be used on LP-456, save money and convenience.
|Logic Signal Level||10mA|
|IOL & IOH Current||<±2.5nS (3-5V)|
|VDD & VIO Level||1.5V~6.5V,10mV|
|IDD & IIO Current||400mA|
|VPP & VHH Level||1.5V~15.5V,20mV|
|IPP& IHH Current||150mA|
|PIN DRIVERS||48 Pin Universal Pin-Driver x4|
|DUT SORCKET||DIP-48 ZIF(Zero Insertion Force) x 4|
|Supported Devices||NOR FLASH, SPI EPROM, EEPROM, MPU, MCU, CPLD, NV-RAM…etc.|
|Supported File Format||Binary/Machine Code, Intel HEX, TEK HEX, Motorola HEX|
In the box
- 1x Main unit
- 1x USB Cable
- 1x CD (included driver & user's manual)
- 1x DC 5V/6A 30Wpower adapter