The LAB eShop
  • TheLABeShop.com
  • TheLABeShop.de
  • TheLABeShop.fr
  • TheLABeShop.co.uk

PE Micro Cyclone Uni
Flash ISP Programmer | Debugger

PE-Micro-Cyclone-Uni_7
  • PE-Micro-Cyclone-Uni_7
  • PE-Micro-Cyclone-Uni_1
  • PE-Micro-Cyclone-Uni_2
  • PE-Micro-Cyclone-Uni_3
  • PE-Micro-Cyclone-Uni_4
  • PE-Micro-Cyclone-Uni_5
  • PE-Micro-Cyclone-Uni_6

Flash ISP, Debug and Test

Cyclone programmers are powerful tools to in-circuit program, debug, and test MCU devices either in a stand alone mode or controlled from a PC. The programmers are reliable, easy to configure, and extremely simple to operate

Product information

Device support
CYCLONE_UNIVERSAL covers the ARM Cortex devices as well as the following NXP device families:
  • STM32, SPC5, STM8, Kinetics, LPC, S32
  • Qorivva (MPC5xxx), MPC5xx/8xx, DSC, S12Z
  • RS08, S08, HC08, HC(S)12(X), Coldfire
Multiple Communications Interfaces
USB 2.0, Ethernet and Serial interfaces
On-Board Storage
  • 16MB internal memory. The Cyclone may be pre-programmed with non-volatile programming images and controlled via the touchscreen LCD, start button, or remotely from a PC (serial, USB, ethernet). Stand-alone programming operation does not require a PC
Power Switching
Allows switching of the target's power supply via Cyclone "power-in" and "power-out" jacks. On-board electromechanical relays handle the power switching. Power can also be provided to the target via the debug connection
Multiple Image Support
Multiple programming images may be stored in Cyclone memory. The Cyclone can store up to 8 images
Auto-Counting Serial Numbers
Auto-counting serial numbers can be defined as part of the programming image. The Cyclone increments and keeps track of the serial numbers in non-volatile memory
JTAG Daisy Chaining of ARM devices
CYCLONE programmers support daisy chaining multiple ARM MCUs for debug or programming
Touchscreen LCD Display
The 4.3" touchscreen display, in conjunction with the status LEDs and Start button, allows stand-alone control and configuration of the Cyclone
Cyclone Control Suite
The Cyclone Control Suite consists of the Cyclone Control Console, GUI, and SDK. These provide the user with 3 approaches for Cyclone automation and control from the PC. Standard features included. Advanced features, such as dynamic data programming, require an additional license. Read about Gang Programming with Cyclones, a feature available by adding the Advanced Features License to CYCLONE.programmers
Expandable Memory via SDHC Card Port (requires separate license)
Users who wish to have expandable memory can purchase a license to activate the SDHC Card Port on their CYCLONE programmer. SDHC card is required; PEmicro offers SDHC cards certified to work with the CYCLONE. Number of SAP images is limited only by the SDHC card size.

Specifications

ConnectionsEthernet, USB, and Serial communications interfaces
Communication speedFast
Display4.3” Touchscreen LCD
Storage16MB encrypted internal memory
Expandable memory via SD portYes
Limit to number of imagesUp to 8 programming images
Target powerMulti-voltage support for targets ranging from 1.6 to 5.2 Volt
Voltage protection supportYes
Allows switching of the target’s power supplyYes

Your shopping cart Shopping basket

Your cart is empty

Cart Subtotal: 0 €
(Pricing excl VAT)
Currency: