Digital Storage Oscilloscope
Handheld Digital Storage Oscilloscope
This 2 in 1 T&M instrument from OWON has functions combined with digital oscilloscope and a multimeter.
<b>High degree of accuracy of multimeter (3 (3/4)digits). The multimeter functions of OWON HDS series handheld digital oscilloscope are voltage, current, resistance, capacitance, diode, on-off etc whose high resolution and accuracy in designing guarantee measurement. Therefore the users can choose automatic measurement or manual function according to different requirement.
Please note that there are two models available for this product. HDS1022M-N and HDS2062M-N with differences in band width, sample rate and rise time.
- 20MHz¡«60MHz Bandwidth
- up to 250MS/s real time sample rate
- 2 in 1 (Multimeter function support)
- Dual Input Channels
- Advanced Trigger Functions
- Adjustable Trigger sensitivity
- USB Storage /Auto measurement
- Replaceable Li-ion Battery Back-up
- 3.8¡± TFT panel
- Add new function of Trigger Holdoff
- Waveform Record and Playback(HDS2062M-N)
Average acquisition mode
Average waveforms can be shown by continuous sampling which could reduce noise. It helps to gain the basic waveform information from even those interfering signals.
Makes the users to easy use other auxiliary equipments to analyze the exceptional waveform or the unresolved data back to lab or store these data into other files for the second usage.
Tunable triggering sensitivity
The unique function of OWON HDS-N series can distinguish the additional noise in triggering signals.
This function can measure two kinds of different signals to improve work efficiency.
Instantaneous signal observation
Digital afterglow mode can detect the instantaneous changes and display waveform amplitude distributed with the time changes which is the analog oscilloscope applied to digital oscilloscope.
OWON HDS-N series is equipped with standard video triggering of NTSC, PAL and SECAM to improve work efficiency.
|Bandwidth||20MHz or 60MHz (depending on model)|
|Sample Rate (Real time)||100MS/s or 250 MS/s (depending on model)|
|Rise time||¡Ü17.5ns or ¡Ü5.8ns (depending on model)|
|Display||3.8 Inch color display with TFT panel (640x480 pixels, 65535 colors)|
|Record length||Max. 6000 points on each channel|
|GND reference||Oscilloscope and Multimeter independence|
|Time base range||5ns/div-100s/div step by 1-2.5-5 or 5ns/div-100s/div step by 1-2-5 (depending on model)|
|Vertical Sensitivity||5mV/div¡«5V/div (at input)|
|DC Gain Accuracy||¡À5%|
|A/D Converter||8 bits resolution (2ch simultaneously)|
|Max. Input Voltage||400V(PK-PK) CAT¢ò|
|Automatic measurement||Vpp, Vavg, RMS, Frequency, Period, Vmax, Vmin, Vtop, Vbase, Width, Overshoot, Preshoot, Risetime, Falltime, +Width, -Width, +Duty, -Duty, Delay A¡úB Delay A¡úB|
|Trigger Type||Edge, Video, Alternate|
|Trigger Mode||Auto, Normal, Single|
|Sampling Mode||Normal, Peak detection, Average|
|Cursor Measurement||¡÷V and ¡÷T between cursors|
|Waveform storage||4 waveforms|
|USB waveform storage||Available|
|Waveform math||£«,£,¡Á,¡Â, Inverted|
|Digital Multimeter Testing||Voltage, Current, Resistance, Capacitance, Diode, Continuity|
|Full scale reading||3 3/4 digits (Max.4000-count)|
|Input Impedance||10 M¦¸|
|Max input Voltage||AC£º400V, DC:400V|
|Max input Current||AC:10A, DC:10A|
|Interface||USB Data Cable (Transfer waveform data to a PC)|
|Power||Supply:100V¡«240V AC,50/60Hz DC input: 8.5VDC, 1500mA.|
|Power on battery||6 hours|
|Dimension (mm)||180 x 113 x 40|
In the box
- 1x Main unit
- 1x Battery
- 1x AC-DC adapter
- 2x Oscilloscope Probe (grey)
- 2x Multimeter test lead (black and red)
- 1x USB Mass Storage connect cable
- 1x Extension module for small capacitance measurement
- 1x Probe adjustment tools
- 1x USB communication cable or RS-232C communication cable
- 1x User Manual
- 1x CD-ROM (software)
- 1x Output connector (1KHz 5V square-wave test signal)