Total Phase SPI Active Level 2 - 40MHz
Promira Software Application

State-of-the-art Host Adapter Function

This application provides state-of-the-art host adapter functionality. With this application you will be able to actively exercise your SPI bus in many ways.

What's included

  • The SPI Active - Level 2 Application is a download that runs on your Promira Serial Platform unit. Once you have purchased a Promira Serial Platform unit, you'll be able to instantly download and add new applications as they become available.
  • All applications include one full year of software maintenance. As long as your software maintenance is current, you can take advantage of our five-star support. Any time you purchase a new application for your Promira Serial Platform, we'll automatically extend the software maintenance for all applications that have current maintenance support (applications that are out of support do not receive this benefit, so it's always best to keep the maintenance current on your applications). That means if you purchase one new application per year, all your applications will be eligible for software support.

Total Phase SPI Active Level 2 - 40MHz
Promira Software Application


art : TP600610
€ 300 excl. VAT
€ 375 incl. VAT

My AutoQuote | Easy & Fast

Easily generate and keep track of your quotes. You can also place an order based on an active quote. Both Quotes and Orders are organized for you under your account page.

More information

Specifications

Operates in master or slave modeYes
Master signaling rateUp to 40 Mbps (80MHz with Level 3)
Slave signaling rateUp to 20 Mbps
Full duplex master transmit/receiveYes
Asynchronous slave transmit/receiveYes
Software configurable target power pins to power downstream devicesYes
Software configurable Slave Select (SS) polarity in master modeYes

Product information

Please NoteThis is an application that requires installation on the Promira Serial Platform
The SPI Active – Level 1 Application is a pre-requisite to using this application.
Features
  • Master at speeds up to 40 MHz
  • Slave at speeds up to 20 MHz
  • Single slave response of up to 256 bytes
  • Program EEPROM, Flash, or other SPI memory - including Dual I/O programming
  • Use up to 12 GPIOs
  • Up to 3 Slave Selects (configurable, shared with GPIO)
  • Software configurable Slave Select (SS) polarity in master mode
  • Provide up to 200 mA of power to your embedded project - with 2 independent target Power supplies
  • Operates with voltages from 0.9 V - 3.3 V, 5 V fault tolerant

The all-new architecture of the SPI Active - Level 2 Application running on the Promira Serial Platform provides superior performance. With many new embedded features such as integrated voltage level-shifting, advanced message queuing, High-speed USB or Ethernet connectivity to your analysis PC and many more, debugging or programming your SPI system has never been easier or faster.

Once you're running the SPI Active - Level 2 Application on your Promira platform you can create your own interface using Total Phase's robust API or select from our no charge GUIs: Control Center Serial or Flash Center to control your SPI data.

The purchase of your SPI Active - Level 2 Application includes one year of support, allowing you to download any updates for this application for 12 months after purchase.
Bit Rate
  • SPI Master: 31 KHz - 40 MHz†
  • SPI Slave: 31 KHz - 20 MHz
Target Bus Interface
  • SPI Master/Slave
  • 12 configurable GPIOs
DC Characteristics (Promira)
  • Target Power: +5V, 100 mA max (pins 4 and 6)
  • Supplementary I/O Power: 0.9 V - 3.45 V, 100 mA max (pins 22 and 24)
SPI
  • Operates in master or slave mode
  • Up to 40 Mbps† master signaling rate
  • Up to 20 Mbps slave signaling rate
  • Full duplex master transmit/receive
  • Asynchronous slave transmit/receive
  • Software configurable target power pins to power downstream devices
  • Software configurable Slave Select (SS) polarity in master mode
† Actual system bus speed may vary as a function of capacitance.
GPIO - General Purpose IO
  • SPI pins can be repurposed for more general use, allowing them to be used for custom signals on target systems.
  • GPIO functionality can also be combined with I2C or SPI to interact with your target system.
  • GPIO configuration is cached internally to preserve settings between operational modes.

Recently viewed