Total Phase Promira Ethernet Kit
Ethernet Power Connection Kit
This power kit includes one 5 foot Cat 5 Ethernet cable and our USB Micro B Universal Power Adapter.
This kit enables you to power your Promira Serial Platform directly from any wall outlet, while communicating with your analysis PC over Ethernet.
The universal design of the power adapter provides connectivty to outlet types A (mainly used in the USA, Canada, Mexico & Japan), C (mainly used in India), G (mainly used in the United Kingdom, Ireland, Malta, Malaysia & Singapore) and I (mainly used in Australia, New Zealand, China & Argentina).
Using Cat 5 Ethernet for data communcations provides high speed data transmission, enables networked utilization of your Promira platform, and makes factory floor setup and automation easy.
For most applications, the standard 0.5 mA supplied by a standard USB 2.0 connection is sufficient to power your Promira Serial Platform. For certain higher speed applications, such as SPI Active - Level 2 Application, SPI Active - Level 3 Application, Quad I/O SPI functionality, and providing external power to your project, the Promira platform may require additional power. This kit provides a 1.2 amp power adapter plus a 5-foot Ethernet cable for your development, debugging and production needs.
Required for Ethernet TransmissionThis kit is required to power the Promira Serial Platform if you are using Ethernet for your data transmission.
|Input Voltage||90-264 VAC|
|Input Current||< 0.3 A RMS max|
|Input Frequency||47-63 HZ|
|Maximum Power Out Power||6 watts|
|Maximum Current Output||1200 mA|
|Operating Temperature||0°C – 40° C|
|SAFETY APPROVAL||UL60950-1, CUL TO 22.2 #60950-1, SIQ TO EN60950-1 2ND EDITION, CCC TO GB4943-2001, GB9254-1998, GB17625.12003, GOST-R CE CLASS II, AS/NZ TO 60950, C-TICK TO 55022, PSE TO J60950, CB REPORT, NRCAN|
|Ethernet Cat 5 cable||350 MHz max data speed|
In the box
- Power Adapter
- Type A Plug
- Type C Plug
- Type G Plug
- Type I Plug
- CAT 5 Ethernet Cable