Total Phase EEPROM Socket Board
Flash/Burn I2C and SPI EEPROMs
The EEPROM Socket Board provides embedded systems engineers with an easy and cost-effective method of programming I2C- and SPI-based memory devices. Engineers can take full advantage of the Flash Center Software and the Aardvark I2C/SPI Host Adapter or the Cheetah SPI Host Adapter to program their Serial EEPROMs and Serial Flash memory chips.
- Flash and burn I2C and SPI Serial EEPROMs and SPI Flash memory that are in any of these standard chip packages: DIP8, SOIC8 or TSSOP8.
- Specify 5V, 3.3V, or an external VDD Source at any voltage level.
- Connect or disconnect Slave Select (SS) and change the polarity of SS.
- Gang-Program multiple devices by using multiple socket board and programming adapter sets in parallel on the same host computer.
Different devices may have different pin configurations. In order to provide maximum flexibility, the EEPROM Socket Board provides stubs for each of the pins and each of the signals. Using the included 8-pin ribbon cable, users can easily connect the appropriate source to each pin of the target device.
|Programming type||Flash, burn|
|Device types||I2C and SPI Serial Flash|
|Socket||DIP8, SOIC8 or TSSOP8|
|Programming voltage||5V, 3.3V, or an external VDD source at any voltage level|
|Gang-Program multiple devices||Yes, by using multiple socket board and programming adapter|
In the box
- EEPROM Socket Board
- 6" 8-pin cable