USB 2.0 to Serial Converter
USB 2.0 to RS-232 and RS422/485 Conv.
The TRP-C08S is one standard USB 2.0 to Serials Bridge that has one DB-9 RS232 male connectors and 4 PIN screw terminal for RS422/485. The DB-9 pin serial port is configured as a DTE (data terminal equipment) device which is same as all PC COM ports.
- USB-2.0 Device Controller.
- OS get dual port UART serial (1*RS232 and 1*RS422/485)
- On-Chip 512-Byte FIFO for upstream and downstream data transfers for serial Port
- Fully PLC support such as Mitsubishi Q, FX and FATEK serial.
- Auto direction flow control on RS-485.
- Auto baud rate switching from 75bps to 921.6 Kbps.
- 256 byte buffer for upstream and downstream data flow.
- Direct power from USB port , no external power necessary.
- 3000V DC isolated protection.
- Surge protection on RS422/485 data lines.
- Power and TXA/RXA/TXB/RXB communication LED indicator.
- DIN rail or panel mount support.
- Vista64/32,Windows 98/ME/2000/XP/CE3.0, and Linux, and Mac OS compatible.
The RS422/485 with auto configuration in data format, baud rate and RS485 data flow direction control. RS422/485 equips with 3000VDC of isolation and internal surge-protection on each data line, it gives the host computer and module itself entirely protection from destructive voltage spikes and danger of unregulated voltages input. TRP-C08S also features a high-speed 921.6 Kbps transmission rate, and supports various O.S. The industry DIN rail and panel mounting design enable user a fast and professional installation.
|Output||RS232, standard 9 pin DTE full-duplex|
|RS422 signal||Differential 4 full-duplex wires (TX+, RX+, TX-, RX-)|
|RS485 signal||Differential 2 half-duplex wires (D+, D-)|
|Optical isolation||RS422/485 3KV|
|Data Format||Asynchronous data with any combination of bits, parity, stop|
|Parity type||None, odd, even mark, space|
|Data bit||5, 6, 7, 8|
|Stop bits||1, 1.5, 2|
|Flow control||Xon/Xoff, Hardware, None|
|RS422/485 line protection||Against surge, short circuit,+/- 15KV ESD and voltage peak|
|RS232 line protection||+/- 15KV ESD|
|Distance||RS422/485 Up to 4000ft (1250M)|
|Connection type||Screw terminal for maximum AWG #12~30 wire|
|Power consumption||130mA by USB power|
|RS422/485 Optical Isolation||3000V DC|
|Operating environment||-10 to 50°C|
In the box
- Main unit (Power supply not included)
- Software CD